DTF transfer film is a new technology related to direct-to-film printing, So How to use the heat transfer PET DTF film?
Here are some general steps you might follow in the below process:
1. Design the Image and Printing the image with DTF printer:
Design or select the image you want to transfer onto the film using graphic design software.
Use a DTF printer and print the image onto the DTF transfer film.
Make sure to follow any specific printer settings recommended by our DTF transfer film manufacturer.
2. Shaking powder with machine:
Sprinkle extra hot melt adhesive and wind it.
3. Transfer the Image:
Place the printed DTF transfer film onto the heat press machine, making sure it adheres properly.
4. Heat Transfer:
In some cases, heat may be required to facilitate the transfer process. This could involve using a heat press or another suitable method.
Follow the recommended temperature and time settings provided by our DTF film factory.
5. Peel or Finish:
Once the transfer process is complete, carefully peel off the film, leaving the transferred image on clothes.
Note: Always refer to the specific instructions provided by the manufacturer of the DTF transfer film you are using, as different products may have unique requirements and considerations.
If you are unsure or have specific questions, don't hesitate to reach out to us.